RMON History Configuration
To display the following form, go to the RMON History Groups Configuration form. Select a History
Group, or open the History folder and click Add History Group.
The following table describes the History Group Configuration controls:
History Group Configuration controls
History Group ID (1-65535)
MIB Object ID
Number of Buckets
Polling Interval (1-3600)
Configures a numeric identifier for the selected History index.
Configures the interface MIB Object Identifier. The IFOID must correspond to the
standard interface OID, as follows:
where x is the ifIndex
The interface OID can have a maximum of 127 characters.
Configures the number of requested buckets, which is the number of data slots into
which data is to be saved.
The range is from 1 to 65535. The default is 30.
The maximum number of buckets that can be granted is 50.
Configures the time interval over which the data is sampled for each bucket.
The range is from 1 to 3600 seconds. The default value is 1800 seconds.
Enter a text string that identifies the person or entity that uses this History Group.
The owner can have a maximum of 127 characters.
Configuring the switch