Download  Print this page

Switch Trunk Group Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

Hp 10gb ethernet bl-c switch browser-based interface reference guide.
Hide thumbs

Advertisement

Switch Trunk Group Configuration

To display the following form, go to the Trunk Groups Configuration form. Select a Trunk Group number.
This form enables you to configure a selected switch trunk group.
Trunk groups can provide super-bandwidth connections between switches or other trunk capable devices.
A trunk is a group of ports that act together, combining their bandwidth to create a single, larger port. Up
to 12 trunk groups can be configured on the switch with the following restrictions:
Any physical switch port can belong to no more than one trunk group.
Up to six ports can belong to the same trunk group.
All ports in a trunk must have the same configuration for speed, flow control, and autonegotiation.
Trunking from other devices must comply with Cisco® EtherChannel® technology.
The following table describes the Switch Trunk Group Configuration controls:
Table 124
Switch Trunk Group Configuration controls
Control
Trunk State
Ports Available
Ports added to Trunk
Description
Enables or disables the Trunk Group.
Lists the ports that you can add to the Trunk Group.
Lists the ports that are members of the Trunk Group.
Select a port number in the Ports Available list, and click Add to add the port
to the Trunk Group.
Select a port number in the Ports added to Trunk list and click Remove to
remove the port from the Trunk Group.
Configuring the switch
191

Advertisement

Table of Contents

   Related Manuals for HP 445860-B21 - 10Gb Ethernet BL-c Switch

   Related Content for HP 445860-B21 - 10Gb Ethernet BL-c Switch

Comments to this Manuals

Symbols: 0
Latest comments: