Logon Screen - Intel ES460MSX - Ethernet 1000Base SX Switch Module User Manual

C H A P T E
NOTE
Your workstation must be in the
same subnet as the switch to
telnet to the switch.
54
460T Ch5 - Sec 1-Nav & Config.p65
R 5 Intel Express 460T Standalone Switch Users Guide
Using Telnet
1 Open a Telnet application. In Windows 98 or Windows NT*, select
Run from the Start Menu and then type: telnet E.
2 From the Terminal menu, select Preferences. Make sure the emulation
type is VT-100/ANSI and that VT100 arrows are enabled.
3 From the Connect menu, select Remote System. Enter the IP address of
the switch and click Connect. (The default IP address is 192.0.2.1.)
4 Log on to Local Management. By default, no password or username is
assigned.

Logon Screen

Description
By default, no username or password is assigned to the switch. Press
E twice to log on to the Local Manager. Usernames and passwords
can consist of any characters and can be up to fifteen characters in length.
Remember that usernames and passwords are also case-sensitive.
54 4/19/00, 4:16 PM