Logon Screen - Intel Express 530T User Manual

C H A P T E R
NOTE
Your workstation must be in
the same subnet as the switch
to Telnet to the switch.
52
®
5 Intel Express 530T Switch Users Guide
Using Telnet
1 Open a Telnet application. In Windows 98 or Windows NT*, select
Run from the Start Menu and then type: telnet E.
2 From the Terminal menu, select Preferences. Make sure the
emulation type is VT-100/ANSI and that VT100 arrows are enabled.
3 From the Connect menu, select Remote System. Enter the IP address
of the switch and click Connect. (The default IP address is
192.0.2.1.)
4 Log on to Local Management. By default, no password or user name
is assigned.

Logon Screen

Description
By default, no user name or password is assigned to the switch. Press
E twice to log on to the Local Manager. User names and passwords
can consist of any characters and can be up to fifteen characters in length.
Remember that user names and passwords are also case-sensitive.