Table of Contents
Advertisement
C
H
A
P
T
E
28
460T Ch3.p65
R
3
Intel Express 460T Standalone Switch Users Guide
To add a device to the Device Tree
Use this procedure if the device does not automatically appear after
installation.
1 Right-click anywhere on the Device Tree.
2 Click Add Device on the menu that appears.
3 In the Add Device dialog box, type the IP address of the switch you
want to add.
4 Fill in the other fields, as appropriate.
5 Click OK.
The new switch's icon appears in the Device Tree.
To refresh the Device Tree
1 Right-click anywhere on the Device Tree.
2 Click Refresh on the menu that appears.
Refreshing the Device Tree updates it to show any newly discovered
devices and changes in device status.
To delete a device from the Device Tree
1 Right-click the device you want to remove from the Device Tree.
2 Click Delete on the menu that appears.
Deleting a device from the Device Tree does not affect the actual device.
To find a device in the Device Tree
1 Right-click anywhere on the Device Tree.
2 Click Find on the menu that appears.
3 In the Find Device dialog box, type the IP address of the device you
want to find in the tree.
4 Click OK.
The device's icon is highlighted in the Device Tree.
Losing contact with a device
If Intel Device View loses contact with a switch, it replaces the switch icon
with the non-responding switch icon, which is red.
28
4/19/00, 11:04 AM
Advertisement
Table of Contents
