HP D7171A - NetServer - LPr Installation Manual page 93

Chapter 8 Mounting the HP NetServer in an HP Rack System/E or Rack System/U
4. Pull the LT 6000r forward onto the slides until the nib on the blue latch
snaps into the square hole on the slide. This ensures that the mounting
hooks are properly seated inside the chassis, and that the server is locked
into position on the slides (see Figure 8-7).
Figure 8-7. Latch Nib Inside Square Hole on Slide (View with Bezel Removed)
5. Remove the four handles from the sides of the chassis. See Figure 8-8.
85