HP D7171A - NetServer - LPr Installation Manual page 106

Chapter 10
l
Select NOS:
You will be asked to select the NOS and version you plan to install.
l
Select NOS Installation Mode:
For certain versions of Novell NetWare/IntranetWare and Microsoft
Windows NT Server, you will be asked:
Would you like to use HP's automated mode of NOS
installation?
Select Yes for automated NOS installation.
Perform an automated NOS installation for first-time installation of
Novell NetWare/IntranetWare or Microsoft Windows NT Server on a
factory-configured NetServer.
Automated NOS installation will guide you through the NOS
installation, set up the hard disk drive, and configure your NOS with
appropriate drivers for HP-bundles configurations.
This installation also loads the Local Support Tool onto Windows NT
or NetWare systems. The Local Support Tool is a standalone support
tool accessed directly from the NetServer. It provides information to
help you manage the NetServer.
Select No for manual NOS installation.
Perform a manual NOS installation if you are installing a NOS other
than certain versions of Novell NetWare/IntranetWare or Microsoft
Windows NT Server, or if you have replaced any HP components.
For Manual NOS Installation Only: Before you perform a manual
NOS installation, you must print instructions and manually create
NOS-specific driver diskettes as follows:
Create Drivers Diskette(s): On the Create Drivers Diskette(s)
screen, select Create Drivers Diskette(s) to create one or more
customized diskettes containing HP drivers and configuration files
to use when you install the NOS.
Print and Read Instructions: On the Show NOS Installation
Instructions screen, select Save to Disk to copy the NOS
installation Instructions to disk. Then print them out from the disk.
Read the instructions, and follow them to install the NOS.
l
View Configuration Advisories:
Read the configuration advisories, and print them if necessary. You can
change your hardware at this time to conform to the advisories.
98
Configuring the HP NetServer