Opening And Closing The System Board Access Panel - HP D7171A - NetServer - LPr Installation Manual

Chapter 3
Opening and Closing the System Board Access
Panel
This section explains how to open and close the system board access panel that is
located on the top of the LT 6000r as shown in Figure 3-2.
Panel latches
Figure 3-2. System Board Access Panel Location
WARNING
Always properly shutdown and power off the NetServer
before you open the system board access panel. Refer to your
network operating system (NOS) documentation for proper
shutdown procedures.
Opening the system board access panel before shutting down
the NetServer can corrupt applications files and damage the
NOS.
24
Opening and Closing the HP NetServer
System board
access panel
Handle (in closed position)