B Regulatory Information; Regulatory Notices - Electromagnetic Compliance - HP D7171A - NetServer - LPr Installation Manual

B Regulatory Information

Regulatory Notices - Electromagnetic Compliance

Your HP NetServer may fit into Class A or Class B configuration. Refer to the
appropriate information below.
Electromagnetic Compatibility (EMC) requirements have been established in
many countries to regulate the radio frequency energy generated by Information
Technology Equipment (ITE). This energy is generated during the normal and
intended use of this equipment and so it is limited by country regulations to levels
intended to minimize potential interference to other electrical equipment,
including public safety services.
Two levels of radio frequency energy are allowed according to the type or use of
equipment. Class A levels have been established for use in commercial or
business environments. Class B levels are lower than the class A requirement and
have been established for use in residential environments. Class B levels are also
suitable when the environment includes electrically sensitive equipment.
The server equipment you have purchased has been provided with a compliance
label to indicate where it may be used with reasonable protection to the
environment in which it is used. Additional statements are provided below as
required by the requirements of international and domestic regulations.
NOTE
Check the label on your product to determine the level of
operation. The label indicates the class (Class A or B) that the
equipment belongs to.
151