HP D7171A - NetServer - LPr Installation Manual page 88

Chapter 8 Mounting the HP NetServer in an HP Rack System/E or Rack System/U
System, see Chapter 13, Alternative Rack Mounting, for alternative rack mount
instructions.
NOTE Use the HP Rack Assistant software to determine where to
mount the HP NetServer in the rack.
CAUTION
To ensure rack stability, always mount rack components from
the bottom up.
1. Pull the anti-tip foot out of the bottom of the rack (see Figure 8-2).
2. Hold the template against the front face of the right-front rack column.
Line up the template with the same rack space that the server will occupy.
(The template covers an area four EIA units high, the same height the
80
Figure 8-2. Anti-Tip Foot