Netserver Status Leds - HP D7171A - NetServer - LPr Installation Manual

Chapter 2
Control
Status screen
Server Status LEDs
Red
Yellow
Green
Red Yellow Green
LED LED
Off Off
Flashing Off
Off Flashing
Off Off
Description
Resets the HP NetServer. This switch may be disabled by
Secure mode.
Reports system status. For details, see the following section:
"Viewing System Information."
Three LEDs—one red, one yellow, one green—are on the right
side of the front panel console. They give you a quick idea of
the HP NetServer's general health. The signals provided reflect
the most critical pending event in the system.
LED Indicates NetServer Status:
Off Main power is off, and the NetServer might or might
not be on standby power.
Off Immediate attention is required due to a failed
component in the NetServer. The NetServer might not
be fully operational, due to this condition, such as POST
errors.
Off Attention is required due to a pre-failure condition. This
condition might be caused by a component failure (for
example, a redundant fan or power supply) that could
lead to a critical component failure, such as a processor
module exceeding its operating temperature. If the
failed component is redundant, the NetServer might still
be operating normally.
On The NetServer is operating normally.
Controls, Indicators, and Ports
11