HP D7171A - NetServer - LPr Installation Manual page 147

Chapter 13
2. With the help of at least one other person, lift the server by its four
handles, and position it directly over the extended slides (see Figure 13-7).
NOTE The arrows embossed on the sides of the LT 6000r must line up
with the slide's mounting hooks before you lower the server
onto the slides. These hooks fit inside the server as you lower it
onto the slides.
WARNING
The LT 6000r weighs up to 100 lbs (45 kgs). At least two
people are needed to lift the server into position. Failure to
observe this warning could result in serious injury to you or
damage to the LT 6000r.
3. Lower the server onto the slide members. Ensure that the mounting hooks
have been properly seated inside the chassis.
Figure 13-7. Mounting the NetServer
Alternative Rack Mounting
139