Hot Swap Drive Bay Addresses - HP D7171A - NetServer - LPr Installation Manual

Chapter 4

Hot Swap Drive Bay Addresses

The hot-swap cage is addressed from left to right as ID 00, ID 01, ID 02, and
ID 03 as shown in Figure 4-1. The NetServer's default boot sequence starts at
ID 00.
Figure 4-2 shows the location of the external SCSI connector on the LT 6000r rear
panel.
36
ID00
ID01
Figure 4-1. Hot-Swap Cage
Figure 4-2. External SCSI Connector
Installing Mass Storage Devices
ID02
ID03