HP D7171A - NetServer - LPr Installation Manual page 53

Chapter 5
WARNING
Always disconnect the power cords before opening the system
board access panel to avoid exposure to high energy levels
that might damage equipment or cause personal injury.
Disconnect any telephone cables to avoid exposure to shock
hazard from telephone ringing voltages.
6. Identify the socket locations for the DIMM pairs according to the
following table:
Table 5-1. Paired Memory Sockets
Socket 1A and Socket 1B
Socket 2A and Socket 2B
Socket 3A and Socket 3B
Socket 4A and Socket 4B
7. Install the DIMM pairs:
a. Remove a DIMM from its container, handling the module by its edges.
Lay it on an anti-static surface.
b. Choose a socket that you want to install the DIMM.
c. Spread the two retaining clips on the socket.
d. Align the notches on the DIMM with the keys on the socket.
Installing Additional Memory
45