HP D7171A - NetServer - LPr Installation Manual page 176

Appendix D
7. Attach the rear shipping bracket:
a. Slip the rear shipping bracket into the slot located on the left-rear side
of the NetServer chassis (see Figure D-4).
b. Attach the rear shipping bracket to the right-rear side of the NetServer
chassis with two Torx 6-32 screws (see Figure D-4).
c. Attach the rear shipping bracket to the right-rear column (looking from
the back of the rack) with two M5 screws (see Figure D-4).
Figure D-4. Attaching the Rear Shipping Bracket to the NetServer
168
Transporting the HP NetServer
and Column