Modem Board Removal - Toshiba Tecra M1 Series Field Replaceable Unit Documentation

FIELD REPLACEABLE UNIT DOCUMENTATION

MODEM BOARD REMOVAL

M2x4 brass screws
1. Remove two M2x4 brass screws securing the
modem board.
2. Disconnect the modem board from PJ2017 on the
system board.
3. Disconnect the modem cable from JP1 on the
modem card.
COOLING MODULE REMOVAL
M2.5x10 black flat head screws
4. Remove four M2x6 brass screws securing the
cooling module.
5. Lift out the cooling module assembly.
Tecra
M1 Series
M2.5x16
black flat
head screw
Modem board
Cooling
module
assy
TOSHIBA
Tough Enough for Today's World.
TM
COOLING MODULE REMOVAL
CPU cover
1. Turn the computer upside down.
2. Remove three M2.5x4 black flat head screws and
one M2.5x16 black flat head screw securing the
CPU cover.
3. Lift out the CPU cover.
CPU REMOVAL
CPU
Close
Silicone grease
6. Insert a flat head screwdriver to the CPU lock
and rotate it counter-clockwise to unlock the CPU.
7. Lift out the CPU.
M2.5x4 black flat head screws
Open
CPU lock