Wireless Communication Switch; Wireless Communication Indicator - Toshiba PP350 User Manual

Security
Two advanced security mechanisms ensure a high level of security:
Authentication prevents access to critical data and makes it impossible to
falsify the origin of a message.
Encryption prevents eavesdropping and maintains link privacy.

Wireless communication switch

You can enable or disable wireless LAN and Bluetooth function, with the on/off
switch. No transmissions are sent or received when the switch is off. Slide the
switch toward the back of the computer to turn it on and toward the front of the
computer to turn it off.
CAUTION: Set the switch to off in airplanes and hospitals. Check the
indicator. It will stop glowing when the wireless communication function is
off.

Wireless communication Indicator

The wireless communication indicator indicates the status of the wireless communi-
cation functions.
Indicator status Indication
Indicator off
Indicator glows
If you used the Task Bar to disable W-LAN, restart the computer or follow the
procedures below to enable the system to recognize W-LAN. Open or click the
following: start, Control Panel, System, Hardware Device Manager,
Network adapters, TOSHIBA Wireless LAN Mini PCI Card and enable.
NOTE: Indication of Wireless Communication Standards (Wireless LAN
and Bluetooth)The indication of Wireless LAN and Bluetooth is de-
scribed on the sticker affixed to the computer. The sticker can be seen by
removing a battery pack from the computer.
Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction
Wireless communication switch is on.
Wireless LAN or Bluetooth is turned on by an
application.
Wireless communications
4-15