Installing The Keyboard - Toshiba satellite A20 series Maintenance Manual

4 Replacement Procedures

Installing the Keyboard

To install the keyboard, follow the steps below and refer to figures 4-15 to 4-17.
1. Seat the keyboard face down on the palm rest.
2. Connect the keyboard cable to PJ3230 on the system board.
3. Insert the tabs on the keyboard support plate first, then place the keyboard support
plate on the keyboard cable and secure the keyboard support plate with the following
screw.
• M2.5×6
4. Align the tabs on the bottom of the keyboard with the holes on the top cover and
rotate the keyboard down.
5. Secure the keyboard with the following screws.
• M2.5×4
6. Place the keyboard hold plate on the keyboard and the switch board. Then secure the
keyboard hold plate with the following screw.
• M2.5×4
7. Seat the keyboard brace and press to secure the latches.
4-34
FLAT HEAD screw
FLAT HEAD screw
FLAT HEAD screw
×1
×2
×1
Satellite A20 Maintenance Manual (960-444)
4.10 Keyboard