System Test - Toshiba Satellite U400 Maintenance Manual

Test Program for Field.
3.4

System Test

To execute the System Test select 01 from the Diagnostic Test Menu, press Enter and follow
the directions on the screen. The System Test contains three subtests. Move the highlight bar
to the subtest you want to execute and press Enter.
Subtest 01
Subtest 02
[BOIPCU.EXE] Program Version : 1.0 03-27-2007
voltage
temperature
current
average current
relative state of charge : 93 %
absolute state of charge : 89 %
remaining capacity
full charge capacity
run time to empty
average time to empty
average time to full
cycle count
design capacity
design voltage
specification information : 2.1
serial no.
STATUS
Press [ESC] KEY to exit
Satellite U400 and Satellite Pro U400 Tests and Diagnostics Manual
Downloaded from LpManual.com Manuals
FAN ON/OFF Checking
Select 1,2,3 to control FAN on/off , 1=Fan on , 2=Fan off , 3=Exit .
[BU1FAN.EXE] Program Version : 1.0
1: Fan On 2: Fan Off 3: Exit
Fan1 Status On Fan1RPM : 5000 or Fan1 Status OFF Fan1RPM : 0
Battery Test
This will display battery information for check , press [ESC] to exit .
: 12522 mV
: 24.4 'C
: 1330 mA
: 1327 mA
: 3546 mAh
: 3800 mAh
: -1 min.
: -1 min.
: 101 min.
: 10 times
: 4000 mAh
: 11100 mV
: 32009
: INIT
Remaining capacity alarm
Remaining time alarm
Battery mode
AtRate
At rate time to full
At rate time to empty
At rate O. K.
Maximun error
Charging current
Charging voltage
Manufacturer name
Device name
Device chemistry
Manufacturer data
Manufacture date
: 400 mAh
: 10 min
: 0
: 0 mA
: 65535 min
: 65535 min
: FFFF
: 2 %
: 2800 mA
: 12600 mA
: SANYO
: NS2P3SZDNVWR
: LION
: 0
: 9/13/2005
11