Local Fax Name Entry - Kyocera KM-2560 Operation Manual

Preparation Before Use

Local FAX Name Entry

2-4
When you enter the Local FAX Name, the name is printed on faxes on the
receiving system. The receiving side can then easily recognize where the
originals are sent from.
NOTE:
To change the entry, follow the same operation.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of Transmission, [Next] of Basic, and then
[Change] of Local FAX Name Entry. The entry screen will be displayed.
3 Enter the Local FAX
Name to be
registered. Up to 16
characters can be
entered.
NOTE:
For details on character entry, refer to Character Entry Method on
page 2 of the Appendix.
4
Press [OK].
5 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.

Local FAX Name Entry

Use the keyboard to enter.
1 2 3 4 5 6 7
q w e r t y u
a s d f g h
z x c v b n
Upper-case Lo wer-case No./Symbol
Status
Limit: 16 characters
Input: 0 characters
Backspace
8 9 0 - = `
i o p [ ]
j k l ; ·
m , . /
Space
Cancel OK
6/6/2006 10:00
OPERATION GUIDE