Kyocera KM-2560 Operation Manual page 36

FAX Operation (Basic)
3-4
Direct Transmission (When originals are placed in the document
processor)
After the telephone line has connected with the receiving system, scanning
of the originals placed in the document processor starts. When multiple-
page originals are placed, each page is scanned after the previous one is
sent.
Direct Transmission (When originals are placed on the glass
surface)
This method is suitable for sending book originals that cannot be placed in
the document processor. After the telephone line has connected with the
receiving system, the originals placed on the glass surface are scanned
and sent.
NOTE:
When continuous scan is set, you can continue with scanning of
a next original after an original on the glass surface has been sent. Every
time one page is scanned, you perform an operation to allow continued
scanning.
Placing Originals
3
Place the originals on the glass surface or in the optional document
processor. Refer to the machine's Operation Guide for placing originals.
Dial the Receiving System
4 1
Press [FAX No.
Entry].
Ready to send.
Enter Destination.
Destination
Chain Detail/Edit Delete
00 1 002 0 03
Free A OFFICE
0 06 007 0 08
Type of Original/
Destination Quick Setup
Transmission
Status
Destinatio n
0
Detail
Address Book
E-mail
1/1
Addr Entry
Fo lder Path
Entry
Recall
FAX No.
Entry
00 4 005 No .
i-FAX
Addr Entry
00 9 010 1 /1 0
Color/Image Advanced
Setup
6/6/2006 10:00
OPERATION GUIDE