Cancelling Direct Transmission - Kyocera KM-2560 Operation Manual

FAX Operation (Basic)
Cancelling and Sending Delayed Transmissions (Queued)

Cancelling Direct Transmission

Cancelling Transmission (Disconnection of Communication)
3-14
To cancel delayed transmissions that are queued, or to send delayed
transmissions immediately rather than waiting for the specified time, use
the procedure below.
1 Press the Status/Job Cancel
key.
2
Press [Sending Jobs], and then [Scheduled Job].
3
To cancel a delayed
transmission, select
the job to be
cancelled and press
[Cancel].
When the cancel
confirmation screen
appears, press
[Yes].
Transmission is
canceled.
To send delayed transmission immediately, select the job to be sent and
press [Start Now].
When the send confirmation screen appears, press [Yes].
Transmission begins.
During direct transmission, to cancel communication during transmission,
press the Stop key on the operation panel or [Cancel] on the touch panel.
The originals that have been scanned are ejected, and the screen returns
to the send default screen. When originals remain in the document
processor, take them out.
When you cancel sending or receiving by disconnecting the telephone line
during communication, use the following procedure.
Status
Status Scheduled Job
Job No. Accepted Time Type Destination
000 007 9:30 A OFFICE
Cancel Start Now
Printing Jobs Sending Jobs
Executing TX job . 7
Status
Lo g
U ser Name Start Time
12:00
Detail
Storing Jobs Device/ Paper/Supplies
Communication
6/6/2006 10:00
OPERATION GUIDE
1/1