Kyocera KM-2560 Operation Manual page 80

FAX Operation (Application)
4-14
1
Press the Status/Job
Cancel key.
2
Press [Device/
Communication],
and then
[Manual RX].
Reception will
start.
NOTE:
When using a telephone set that can send tone signals, use the
telephone to start the reception of originals with the remote switch
function. (Refer to Remote Switch Function on page 5-9.)
When you hear a voice from the receiving system
The telephone line has connected to the telephone of the sending system.
When the conversation is over, follow steps 1 to 2 above.
After the sending system has started transmission, the machine starts
receiving originals.
4 When reception starts (when the Receive indicator on the operation panel
starts blinking), return the handset to its original position.
Status
Scanner
Ready.
Printer
Ready.
Removable M emory
Not connected.
Format Remove
FAX Port 1
Ready.
Line Off M anual RX
FAX Log
Printing Jo bs Sending Jobs Storing Jo bs
Status
Hard Disk
M emo ry Card
No t connected.
Format Printing list
FAX/i-FAX Check New FAX
Device/
Paper/Supplies
Co mmunicatio n
6/6/2006 10:00
OPERATION GUIDE