Manual Reception - Kyocera KM-2560 Operation Manual

Manual Reception

OPERATION GUIDE
This method allows you to receive faxes by pressing [Manual RX] after
confirming that the telephone line has connected to the sending system.
Connecting a telephone set (commercially available product) to this
machine enables you to receive originals after talking to the person at the
sending system.
NOTE:
FAX Automatic Reception has been preset for the receiving mode
of this machine. To use Manual Reception, you need to change the
receiving mode to Manual Reception. To change to manual mode, refer to
Receiving Mode on page 7-5.
When the Dual FAX option is installed, the only receiving mode available
on port 2 is FAX Automatic reception.
Receiving after Confirming Connection to the Sending System
You can receive originals after confirming by sound that the telephone line
has connected to the sending system.
1
When there is an incoming call, the machine makes a ringing tone.
2
Press the Send key.
3 Press [FAX No. Entry], [On Hook], and then [Manual RX].
4 After the sending side has started transmission, the machine starts
receiving the originals.
Using the Telephone to Receive
Use this method when you want to receive originals after talking to the
person at the sending system.
1 When there is an incoming call, the telephone connected to the machine
makes a ringing tone.
2
Lift the handset of the telephone.
3
Check if the telephone line has connected to the fax of the sending system.
When you hear the fax tone
The sending system is on fax.
FAX Operation (Application)
4-13