Kyocera KM-2560 Operation Manual page 39

OPERATION GUIDE
• 200 × 400 dpi (Super Fine): when sending originals with minute
characters and lines
Typical character size: 6 point (example:
• 400 × 400 dpi (Ultra Fine): when sending originals with minute
characters and lines more finely
Typical character size: 6 point (example:
• 600 × 600 dpi (600dpi): when sending originals with minute characters
and lines as finely as possible
Typical character size: 6 point (example:
NOTE:
The default setting is 200 × 200 dpi (Fine).
The higher the resolution, the clearer the image. However, higher
resolution also means longer send times. Normally, up to 400 × 400 dpi
(Ultra Fine) is recommended.
The machine does not support resolution of 300 × 300 dpi when sending
faxes. If you have selected 300 × 300 dpi, the machine sends faxes after
lowering the resolution to 200 × 200 dpi (Fine).
1
To change the
resolution,
press [Color/
Image], and
then [Scan
Resolution].
NOTE:
You can see a preview of the image to be sent by pressing
[Preview]. For details, refer to Previewing Images on page 3-32.
2
Select the
resolution.
3
Press [OK].
Resolution Resolution
Resolution Resolution
Resolution Resolution
Ready to send.
Sending Image
Density
Sharpness
Original : Letter
Zoom : 100%
Send : Letter
Preview
Destinatio n Quick Setup Type of Original/
Transmissio n
Status
Ready to send.
Scan Resolutio n
Select fineness o f scanning resolutio n.
The larger the number, the better the
image resolution.
Press [OK] to display
the image.
60 0x600 dpi
20 0x400 dpi
Super Fine
Add Shortcut
Status
FAX Operation (Basic)
)
)
)
Destinatio n
Original Scan Color
Image Reso lution Selection
Backgro und
Density Adj.
Color/Image Advanced
Setup
6/6/2006 10:00
Destinatio n
40 0x400 dpi 30 0x30 0dpi
U ltra Fine
20 0x200 dpi 20 0x10 0dpi
Fine Normal
Cancel OK
6/6/2006 10:00
1
1
3-7