Kyocera KM-2560 Operation Manual page 102

FAX Operation (Advanced)
5-18
NOTE:
To set the FAX Box as the Forward Destination, register the FAX
Box in advance. For details, refer to FAX Box Function on page 5-37.
19 Select the FAX Box to be used to store the originals and press [OK].
20 Set details for forwarding settings. You can change the following settings.
• Print setting
• Enable time setting
• File name registration
NOTE:
For details on forwarding settings, refer to Forwarding Detail
Settings on page 5-19.
21
Press [Register]. The forwarding settings is registered.
22
To register another forwarding settings, repeat steps 4 to 21.
23 Press [Others].
24 Press [Change] of Others.
25 Select [On] or [Off], and press [OK].
To register a forwarding setting in the case that received originals have not
met reception requirements, select [On].
To perform normal reception print in the case that received originals have
not met reception requirements, press [Off], and go to step 27.
26 Perform forwarding settings, referring to steps 11 to 20.
NOTE:
You can only store originals in the FAX Box when valid
requirements are set.
27
Press [Register]. The forwarding settings is registered.
28
Select the checkbox beside the forwarding settings to be enabled from the
list. The checkbox beside the forwarding setting to be enabled is checked.
NOTE:
To disable the setting, press the checkbox to delete the
checkmark.
29 Press [OK]. Memory forwarding is set.
OPERATION GUIDE