Kyocera KM-2560 Operation Manual page 40

FAX Operation (Basic)
3-8
IMPORTANT:
• If you select a high resolution, the image becomes clearer. However,
the higher the resolution is, the longer the send time is.
• When you send originals at a resolution of 200 × 400 dpi (Super Fine)
or higher, the fax machine on the receiving system needs to be
capable of receiving the originals at such image quality. When the
receiving system does not have such capability, originals are sent at
an image quality of 200 × 200 dpi (Fine).
Selecting the Density
6 Adjusting the density when scanning originals
• Manual (-3 to +3): You can adjust the density using seven levels or 13
levels.
• Auto: The optimal density is chosen according to the density of the
originals.
1
To change the
original density,
press [Color/
Image], and
then [Density].
NOTE:
You can see a preview of the image to be sent by pressing
[Preview]. For details, refer to Previewing Images on page 3-32.
2
Select the
density.
3
Press [OK].
Ready to send.
Sending Image
Density
Sharpness
Original : Letter
Zoom : 100%
Send : Letter
Preview
Destinatio n Quick Setup Type of Original/
Transmissio n
Status
Ready to send.
Density
Auto
Press [OK] to display
Lighter
the image.
-3 -2
-2 .5 -1 .5
Add Shortcut
Status
Destinatio n
Original Scan Color
Image Reso lution Selection
Backgro und
Density Adj.
Color/Image Advanced
Setup
6/6/2006 10:00
Destination
Darker
Normal
-1 0 +1 +2 +3
-0 .5 +0 .5 +1.5 +2 .5
Cancel OK
6/6/2006 10:00
OPERATION GUIDE
1
1