Kyocera KM-2560 Operation Manual page 37

OPERATION GUIDE
NOTE:
When you press the numeric keys to enter numbers, the screen
changes to the entry screen for the fax number (the screen shown in the
next step).
2
Enter the fax
number of the
receiving
system using
the numeric
keys.
NOTE:
Up to 64 digits can be entered as the fax number of the receiving
system.
Press [Space] to enter a space.
Use [ ] or [ ] to move the cursor.
To correct the fax number, press [Back Space] on the touch panel, and
delete the digits one by one before reentering the fax number. To delete
the number entirely, press the Clear key on the operation panel.
[Pause]
Pressing this key adds about three seconds of waiting time during dialing.
For example, when dialing the receiving system on an external line, you
can use this method to insert a pause before resuming dialing after you dial
a specific number.
3
If necessary,
make any
detailed
settings. Press
each key to
change the
setting, and
press [OK].
Key
Sub Address
Ready to send.
Enter Destination.
FAX No. Entry
Pause Space
Add a new FAX destination.
Enter the FAX number with the numeric keys.
Add to Addr Bo ok Next Dest.
Status
Ready to send.
Enter Destination.
FAX No. Entry
01 2345 67
Pause Space
Add a new FAX destination.
Enter the FAX number with the numeric keys.
Add to Addr Book Next Dest.
Status
Description
To communicate using the sub address, press
this key. For details, refer to Sub Address
Communication on page 5-44.
FAX Operation (Basic)
Destinatio n
0
Sub Address
Transmissio n
Back Space
Start Speed
ECM
Encrypted
Transmissio n
On Ho ok
Cancel OK
6/6/2006 10:00
Destinatio n
0
Sub Address
Transmissio n
Back Space
Start Speed
ECM
Encrypted
Transmissio n
On Ho ok
Cancel OK
6/6/2006 10:00
3-5