Kyocera KM-2560 Operation Manual page 205

OPERATION GUIDE
For information on how to select the resolution, refer to Selecting the
Resolution on page 3-6.
NOTE:
300 × 300 dpi is not supported for i-FAX transmissions. If
300 × 300 dpi is selected, the fax is sent at a lower resolution of
200 × 200 dpi (Fine).
If you selected a resolution that is prohibited by the destination conditions,
the fax is automatically sent using a lower (permitted) resolution.
Selecting the Density
5
Adjusting the density when scanning originals
For information on how to select the density, refer to Selecting the Density
on page 3-8.
Send Start
6 Press the Start key. Transmission
begins.
Checking the Send Status
1
Press the Status/Job
Cancel key.
2
Press [Sending
Jobs].
The list of accepted
time, destination,
and status are
displayed for each
job.
Status
Status Scheduled Job
Job Type All
Job No. Accepted Time Type Destinatio n
0 0000 1 1 0:00 ABCD@xxx.com
Cancel
Printing Jo bs Sending Jobs Storing Jobs
Status Executing TX job 1 .
Internet Faxing (i-FAX)
Log
U ser Name Status
Sending
1/1
Detail
Device/ Paper/Supplies
Communication
6/6/2006 10:00
9-13