Operation At The Receiving System - Kyocera KM-2560 Operation Manual

Operation at the Receiving System

OPERATION GUIDE
8 Press [Use] and use
the numeric keys to
enter the encryption
box number
(4 digits), and press
[OK].
9
Press [OK].
10 Press [OK].
11
Press the Start key. The transmission will start.
To conduct encryption communication operating the receiving system,
follow the steps below.
NOTE:
In encryption communication, sub address communication
cannot be used.
1 Register the encryption key you have arranged with the sending system.
(Refer to Registering an Encryption Key on page 5-60.)
2
Press the System Menu key.
3
Press [FAX/i-FAX], [Next] of Reception and [Change] of Encryption RX.
4 Press [On], select
the encryption key
number and press
[OK].
5 The sending system conducts encrypted transmission. When encryption
communication is conducted normally, the machine decrypts the
encrypted originals received and prints the originals.
FAX Operation (Advanced)
Ready to send.
Enter Destination.
FAX No. Entry - Encryption Box
No t U se
Enter box number using numeric keys.
Use
Box No .
0002
Status
FAX - Encryption RX
Decrypt the received data.
Select the key to decrypt.
Off
On
Key 01
Key 02
Status
Destination
Cancel OK
6/6/2006 10:00
Encryption key No.
1/1
Cancel OK
6/6/2006 10:00
5-63
0