Trademark Information; Fcc Part 68 Requirements - Kyocera KM-2560 Operation Manual

General Notice

Trademark Information

FCC PART 68 REQUIREMENTS

OPERATION GUIDE
• Microsoft, Windows, Windows NT, and Internet Explorer are registered
trademarks of Microsoft Corporation in the U.S. and other countries.
• Windows ME and Windows XP are trademarks of Microsoft
Corporation.
• Ethernet is a registered trademark of Xerox Corporation.
• IBM and IBM PC-AT are trademarks of International Business
Machines Corporation.
• Adobe and Acrobat are registered trademarks of Adobe Systems
Incorporated.
All other company and product names in this Operation Guide are
trademarks or registered trademarks of their respective companies. The
designations™ and ® are omitted in this guide.
1
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the right side of the
equipment to install FAX System (M) is a label that contains, among
other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to
the telephone company.
2
This equipment connects to the network via USOC RJ11C.
3
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable FCC
Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
4
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line
may result in the devices not ringing in response to an incoming call.
In most but not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may be connected
to a line, as determined by the total RENs, contact the local
telephone company. For products approved after July 23, 2001, the
REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits represented by ## are the
REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier
products, the REN is separately shown on the label.
iii