Kyocera KM-2560 Operation Manual page 100

FAX Operation (Advanced)
5-16
9 Register the forwarding requirements.
When FAX was selected in step 8.
Forwarding
requirements
Sub Address
Sender FAX
Number
Port
When i-FAX was selected in step 8.
Forwarding
requirements
E-mail Address
NOTE:
When you set the sender fax number or destination address as a
forwarding requirement, you can use an asterisk (*) as a wild-card
character. You can use this feature to specify a domain or to specify faxes
from a particular country or region, for example.
E.g.:
• '44*': Only fax numbers that start with '44' are forwarded.
• '*@AAAA.com' or '*@AAAA*': Only Internet faxes received from
senders at the AAAA.com or AAAA domains are forwarded.
The '*' wild-card character can only be used at the beginning or end of a
character string.
10 Press [OK].
11 Press [Next] of Forward Setting.
12 Press [Change] of Forward Destination.
Registration method
Press [Sub Address] and enter the sub address
using the numeric keys. You can use up to 20
digits including the numbers from 0 to 9,
' (space)', '#' and '*' characters to enter a sub
address.
Press [Sender FAX Number] and enter the
sender's fax number using the numeric keys.
You can enter up to 20 characters.
Press [Port] and select [Port 1] or [Port 2]. This
setting only appears when the Dual FAX option
is installed.
Registration method
Press [E-mail Address]. Enter the destination
Internet fax address and then press [OK]. You
can enter up to 126 characters.
OPERATION GUIDE