Fax Automatic Reception - Kyocera KM-2560 Operation Manual

FAX Automatic Reception

OPERATION GUIDE
When using this machine as a FAX-dedicated machine that does not
receive telephone calls, set the machine to FAX-dedicated reception. No
special operation is required when receiving faxes.
NOTE:
When you are receiving DRD service from a telephone company,
change the reception method to [Auto (DRD)]. For details, refer to DRD
Reception (Available for inch versions only) on page 5-7.
Reception Method
This machine allows the following five reception methods.
• Auto (Normal)
• Auto (FAX/TEL) (Refer to page 5-2.)
• Auto (TAD) (Refer to page 5-4.)
• Auto (DRD) (Refer to page 5-7.)
• Manual (Refer to page 4-13.)
Checking and Changing the Reception Method
1 Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of Reception, [Next] of FAX, and then [Change]
of RX Setting.
3 Select [Auto (Normal)].
4 Press [OK].
5 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Reception Starts
1 When a fax has been sent to you, the machine rings the registered number
of times, and then starts receiving the fax.
After reception has started, the Receive indicator blinks.
FAX Operation (Basic)
3-11