Kyocera KM-2560 Operation Manual page 106

FAX Operation (Advanced)
Settings for Memory Forwarding from COMMAND CENTER (RX/Forward
Requirements Settings)
5-22
NOTE:
For details on character entry, refer to Character Entry Method on
page 2 of the Appendix.
Please note that when you have not add any additional information, file
names become the same, and, therefore, old files are overwritten when
received originals are forwarded with folder (SMB) transmission and folder
(FTP) transmission.
7
Press [OK].
8
Press [OK].
9
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
You can use COMMAND CENTER on a computer connected to the
network to specify the memory forwarding settings on this machine.
Refer to the machine's Operation Guide for information on the network
settings.
Accessing COMMAND CENTER
1 Open the web browser.
2 In the Address or Location bar, enter the machine's IP address as the URL,
e.g. http://192.168.48.21/. The web page displays basic information about
the machine and COMMAND CENTER as well as the current status of the
machine.
3 Select a category from the navigation bar on the left to view and set values
for that particular category.
4
If administrator privileges have been enabled on COMMAND CENTER,
remember to enter the correct user name and password when trying to
access the relevant screens.
OPERATION GUIDE