Kyocera KM-2560 Operation Manual page 103

Changing/Deleting a Forwarding Settings (for Each Requirement)
Cancelling the Forwarding Settings
Forwarding Detail Settings
OPERATION GUIDE
30 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
To change or delete a forwarding setting, follow the steps below.
1
Follow steps 1 to 3 of Registration of Forwarding Settings (for Each
Requirement) on page 5-15.
2 Select the requirement name to be deleted or changed.
To delete the requirement name, go to the next step. To change the
requirement name, go to step 4.
3
Press [Delete]. When the confirmation screen is displayed, press [Yes] and
go to step 6.
4
Press [Detail/Edit].
5
Change the forwarding settings referring to steps 5 to 21 of Registration of
Forwarding Settings (for Each Requirement) on page 5-15.
6 When the deletion or change is completed, press [OK].
7 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
To cancel the memory forwarding, follow the steps below.
1
Press the System Menu key.
2 Press [FAX] and then [Change] of Forward Setting.
3 Press [Off] and then [OK].
4
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
With the forwarding settings, you can change the following detail settings.
Enable Time Setting
Register the times when the preset requirements become enabled and
disabled.
1
Follow steps 1 to 3 of Registration of Forwarding Settings (Forward All) on
page 5-13.
FAX Operation (Advanced)
5-19