Chain Dial - Kyocera KM-2560 Operation Manual

Chain Dial

OPERATION GUIDE
Chain dial is a function that allows you to dial by linking fax numbers of the
receiving systems with a chain number created with a number common to
several destinations. By setting a toll free number and an area code to a
chain number, you do not need to enter such numbers for each
transmission.
NOTE:
You can use the chain number at the head of the fax number of
the receiving system.
It is convenient to register chain numbers that are used frequently to the
Address Book or One-touch keys. For registration to the Address Book,
refer to Registering a New Destination on page 3-16. For registration to
One-touch keys, refer to Registering a New One-touch Key on page 3-27.
As an example, when using '212' as the chain number
1 Press the Send key.
2 Place the originals.
3
Press [FAX No. Entry], and enter '212' using the numeric keys, and press
[OK]. To use the Address Book or One-touch keys, select the destinations
to which '212' has been registered.
NOTE:
For the Address Book and One-touch keys, refer to Using the
Address Book on page 3-16 and Using One-touch Keys on page 3-27.
4 From the destination
display, select the
destination to which
'212' has been
registered, and
press [Chain].
5
Enter the fax number to connect to the chain number.
Use the numeric keys to enter a fax number
1
Press [FAX No. Entry]. '212' is already entered, and then enter the
fax number. Press [Next Dest.] to enter the next fax number.
2
After entering all the destinations, press [OK].
FAX Operation (Application)
Ready to send.
Destination
Free 212
Detail/Edit Delete
Chain
001 0 02 003
Free
A OFFICE
006 007 00 8
Type o f Original/
Destinatio n Quick Setup
Transmission
Status
Destinatio n
1
Detail
Address Book
E-mail
1/1
Addr Entry
Fo lder Path
Entry
Recall
FAX No.
Entry
004 00 5 No.
i-FAX
Addr Entry
009 0 10
1 /1 0
Advanced
Co lor/Image
Setup
6/6/2006 10:00
4-9