Setting Send Restriction - Kyocera KM-2560 Operation Manual

FAX Operation (Advanced)

Setting Send Restriction

5-56
2 Select the Permit ID
No. to be changed or
deleted.
To change Permit ID
No., go to step 3,
and to delete Permit
ID No., go to step 6.
3
Press [Detail].
4
Use [+]/[-] or the
numeric keys to
reenter Permit ID
No. (0000 to 9999)
NOTE:
Press the Clear key to display the previous number.
5
Press [OK]. When the change confirmation screen appears, press [Yes].
Go to step 7.
6 Press [Delete]. When the deletion confirmation screen appears, press
[Yes].
7
To change and delete other Permit ID numbers, repeat step 2 to 6.
8
Press [Close].
9
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
You can restrict the other parties to which you send originals only to the
ones registered in Permit FAX No. and Permit ID No. as well as the ones
registered in the Address Book. To change the sending restriction, follow
the steps below.
1 Press the System Menu key.
FAX - Permit ID List
Register an ID from which faxes will be accepted. (Up to 25 IDs can be registered.)
FAX ID
22 22
Detail
Status
FAX - Add
Add or edit a Permit ID fo r transmissions.
U se [-]/[+] o r the numeric keys to enter a number.
(000 0-999 9)
2222
Status
1 /1
Add
Delete
Close
6/6/2006 10:00
Cancel OK
6/6/2006 10:00
OPERATION GUIDE