Dual Fax - Kyocera KM-2560 Operation Manual

Optional Equipment

Dual FAX

8-4
Installing the Dual FAX option allows you to use 2 phone lines. This
reduces the time until faxes are sent to all the recipients in tasks such as
sequential broadcast transmissions to multiple recipients. Also, because
you can then send and receive simultaneously, there will be fewer
occasions when you cannot receive a fax during fax transmission.
Dual FAX Settings
Refer to Selection of Telephone Line (Inch version only) on page 2-2 and
Local FAX Information Entry on page 2-5 when specifying the settings for
the second line.
Reception Port Selection
You can make one of the 2 phone lines a receive-only line.
1
Press the System Menu key.
2 Press [FAX/i-FAX], [Next] of Reception and then press [Change] of FAX.
Press [Change] of Reception Port.
3 Select a receive-only
port. If you do not
want to set up a
receive-only port,
select [Off].
4
Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Job Accounting Port Restrictions
If job accounting is enabled, you can restrict access so that departments
can only use one port.
FAX/i-FAX - Receptio n Port
Specify the po rt to be used for reception only.
Off Po rt 1
Status
Po rt 2
Cancel OK
6/6/2006 10:00
OPERATION GUIDE