Kyocera KM-2560 Operation Manual page 53

OPERATION GUIDE
13 Press [ ] of Mode and select Simple or Full.
Transmission
mode
Simple mode
Full mode
14
Press [Destination Condition].
15 Specify the destination conditions and press [OK].
Item
Resolution
Compression
Paper Size
16 Press [OK].
17
Press [OK].
18
Check if the destination has been set correctly, and press [Register].The
destination is added to the Address Book.
Description
Transmission confirmation is not sent to the
destination machine.
Transmission confirmation is sent to the
destination machine.
Description
Specify the resolutions that can be received by
the destination fax machine.
If you try to send an i-FAX using a prohibited
resolution, it is automatically changed to a
permitted resolution and then sent.
• 200 × 100 dpi: Permitted (fixed)
• 200 × 200 dpi: Permitted (fixed)
• 200 × 400 dpi: Permitted or prohibited
• 400 × 400 dpi: Permitted or prohibited
• 600 × 600 dpi: Permitted or prohibited
To permit a resolution setting, press the key for
that resolution so that it is highlighted.
To prohibit a resolution, press the key again so
that it is no longer highlighted.
Select a suitable file format for the destination
fax machine.
MH, MR, MMR or JBIG
Specify the suitable document size options for
the destination fax machine.
• A4/Letter: Permitted (fixed)
• B4: Permitted or prohibited
• A3/Ledger: Permitted or prohibited
To permit a document size setting, press the key
for that size so that it is highlighted.
To prohibit a setting, press the key again so that
it is no longer highlighted.
FAX Operation (Basic)
3-21