Resetting The Call Home Database - HP StorageWorks 8/20q Command Line Interface Manual

Resetting the Call Home database

There are two ways to reset the Call Home database. To clear all Callhome profiles, enter the
callhome clear command, as shown in the following example. This command does not affect the Call
Home service configuration.
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> callhome edit
8/20q FC Switch (admin-callhome) #> callhome clear
8/20q FC Switch (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y
To clear all Call Home profiles and reset the Call Home service configuration to the factory defaults, enter
the reset callhome command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> reset callhome
The callhome configuration will be reset and the default values activated.
Please confirm (y/n): [n] y
Reset and activation in progress ....
116 Call Home Configuration