Set Setup Radius; Common Radius Server Configuration Attributes; Server-Specific Radius Server Configuration Attributes - HP StorageWorks 8/20q Command Line Interface Manual

set setup radius

Description Configures RADIUS servers on the switch.
Authority Admin session
Syntax
set setup radius
common
server [server_number]
Operands
common
Prompts you in a line-by-line fashion to configure attributes that are common to all RADIUS
servers. To configure common and server-specific attributes, omit the operand.
describes the common RADIUS server configuration attributes.
Table 47
Attribute
DeviceAuthOrder
UserAuthOrder
TotalServers
Operands
server [server_number]
Prompts you in a line-by-line fashion to configure attributes for the RADIUS server given by
[server_number]. [server_number] is a positive integer. To configure common and specific
RADIUS server parameters, omit the operand.
server configuration attributes.
Table 48
Attribute
ServerIPAddress
ServerUDPPort
DeviceAuthServer
212 Command Reference

Common RADIUS server configuration attributes

Description
Authenticator priority for devices:
• Local: Authenticate devices using only the local security database.
This is the default.
• Radius: Authenticate devices using only the security database on the
RADIUS server.
• RadiusLocal: Authenticate devices using the RADIUS server security
database first. If the RADIUS server is unavailable, then use the local
switch security database.
Authenticator priority for user accounts:
• Local: Authenticate users using only the local security database. This
is the default.
• Radius: Authenticate users using only the security database on the
RADIUS server.
• RadiusLocal: Authenticate users using the RADIUS server security
database first. If the RADIUS server is unavailable, then use the local
switch security database.
Number of RADIUS servers to configure during this session. Setting
TotalServers to 0 disables all RADIUS authentication. The default is 0.

Server-specific RADIUS server configuration attributes

Description
IP address (version 4 or 6) or DNS host name of the RADIUS server. The
default is 10.0.0.1.
User Datagram Protocol (UDP) port number on the RADIUS server. The
default is 1812.
Enable (True) or disable (False) this server for device authentication.
The default is False.
Table 48 describes the server-specific RADIUS
Table 47