HP StorageWorks 8/20q Command Line Interface Manual page 138

The following is an example of how to upload a configuration backup file (configdata) from the
workstation to the switch and then restore the configuration.
#> ftp symbolic_name or ip_address
user: images
password: images
ftp> bin
ftp> put configdata
ftp> quit
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> config restore
The switch will be reset after restoring the configuration.
Please confirm (y/n): [n] y
Alarm Msg: [day month date time year][A1005.0021][SM][Configuration is
being
Alarm Msg: [day month date time year][A1000.000A][SM][The switch will be
reset in 3 seconds due to a config restore]
8/20q FC Switch (admin) #>
Alarm Msg: [day month date time year][A1000.0005][SM][The switch is being
reset]
See also set config
show config
set config
show config
138 Command Reference
restored - this could take several minutes]
port, page 195
port, page 235
switch, page 200
switch, page 238