Securityset - HP StorageWorks 8/20q Command Line Interface Manual

securityset

Description Manages security sets in the security database.
Authority Admin session and a Security Edit session. For information about starting a Security Edit session, see
the security command . The active, groups, and list operands are available without an
Admin session. You must close the Security Edit session before using the activate and
deactivate operands.
Syntax
securityset
activate [security_set]
active
add [security_set] [group_list]
copy [security_set_source] [security_set_destination]
create [security_set]
deactivate
delete [security_set]
groups [security_set]
list
remove [security_set] [group]
rename [security_set_old] [security_set_new]
Operands
activate [security_set]
Activates the security set given by [security_set] and deactivates the currently active security set.
Close the Security Edit session using the security save or security cancel command
before using this operand.
active
Displays the name of the active security set. This operand is available without an Admin session.
add [security_set] [group_list]
Adds one or more groups given by [group_list] to the security set given by [security_set]. Use a
<space> to delimit multiple group names in [group_list]. A security set can have a maximum of
three groups, but no more than one group of each group type.
copy [security_set_source] [security_set_destination]
Creates a new security set named [security_set_destination] and copies into it the membership
from the security set given by [security_set_source].
create [security_set]
Creates the security set with the name given by [security_set]. A security set name must begin
with a letter and be no longer than 64 characters. Valid characters are alphanumeric, _, $, ^,
and -. The security database supports a maximum of four security sets.
deactivate
Deactivates the active security set. Close the Security Edit session before using this operand.
delete [security_set]
Deletes the security set given by [security_set]. If the specified security set is active, the command
is suspended until the security set is deactivated.
groups [security_set]
Displays all groups that are members of the security set given by [security_set]. This operand is
available without an Admin session.
list
Displays a list of all security sets. This operand is available without an Admin session.
remove [security_set] [group]
Removes a group given by [group] from the security set given by [security_set]. If [security_set] is
the active security set, the group will not be removed until the security set has been deactivated.
rename [security_set_old] [security_set_new]
Renames the security set given by [security_set_old] to the name given by [security_set_new].
HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 191