Creating A Profile; Deleting A Profile - HP StorageWorks 8/20q Command Line Interface Manual

Creating a profile

To create a Call Home profile, enter the profile create command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> callhome edit
8/20q FC Switch (admin-callhome) #> profile create profile_1
A list of attributes with formatting and default values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Default Values:
Level
Format
MaxSize
EmailSubject
RecipientEmail
New Value (press ENTER to accept default value, 'q' to quit):
Level
Format
MaxSize
EmailSubject
RecipientEmail
1. <undefined>
The profile has been created.
This configuration must be saved with the callhome save command
before it can take effect, or to discard this configuration
use the callhome cancel command.
8/20q FC Switch (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y

Deleting a profile

To delete a Call Home profile, enter the profile delete command, as shown in the following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> callhome edit
8/20q FC Switch (admin-callhome) #> profile delete profile_1
The profile will be deleted. Please confirm (y/n): [n] y
8/20q FC Switch (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y
112 Call Home Configuration
Alarm
FullText
2000000
<undefined>
(up to 10 entries allowed)
(Alarm,Critical,Warn,None)
(1=FullText, 2=ShortText, 3=Tsc1) :
(decimal value, 650-2000000)
(string, max=64 chars, N=None)
(ex: admin@company.com, N=None)
:
:
: Technical problem
: admin0@company.com