Merged zoneset information
A merged zoneset is a zoneset that is received from another switch as a result of a change to the active
zoneset. You can display the merged zoneset on your switch if the MergeAutoSave parameter is set to
False. For more information about the MergeAutoSave parameter, see
database" (page 75). To display merged zoneset information, enter the zoning merged command, as
shown in the following example:
8/20q FC Switch #> zoning merged
*********************************************************************
To permanently save the merged database locally, execute the
'zoning merged capture' command. To edit the merged database
use the 'zoning edit merged' command. To remove the merged database
use the 'zoning restore' command.
**********************************************************************
Merged (unsaved) Zoning Information
ZoneSet
-------
ZS1
Edited zoneset information
The edited zoneset is a zoneset that you were modifying when a change occurred to the active zoneset or
a fabric merge occurred. To display the unsaved edited zoneset information, enter the zoning edited
command in an Admin session and a Zoning Edit session, as shown in the following example:
8/20q FC Switch (admin-zoning) #> zoning edited
Edited (unsaved) Zoning Information
ZoneSet
-------
ZS1
Zoneset membership information
The zoneset zones, zone list, and zone zonesets commands display zoneset membership
information.
To display the member zones for a specified zoneset, enter the zoneset zones command, as shown in
the following example:
8/20q FC Switch #> zoneset zones ssss
Current List of Zones for ZoneSet: ssss
----------------------------------
zone1
zone2
zone3
72
Zoning Configuration
Zone
ZoneMember
----
----------
Z1
10:00:00:c0:dd:00:b9:f9
10:00:00:c0:dd:00:b9:fa
Z2
10:00:00:c0:dd:00:b9:fb
10:00:00:c0:dd:00:b9:fc
Zone
ZoneMember
----
----------
Z1
10:00:00:c0:dd:00:b9:f9
10:00:00:c0:dd:00:b9:fa
"Configuring the zoning