HP StorageWorks 8/20q Command Line Interface Manual page 302

rename [zone_set_old] [zone_set_new]
Renames the zoneset given by [zone_set_old] to the name given by [zone_set_new]. You can
rename the active zoneset. You must enter the zoning save command to save your changes.
zones [zone_set]
Displays all zones that are components of the zoneset given by [zone_set]. This operand does not
require an Admin session.
Notes • A zoneset must be active for its definitions to be applied to the fabric.
• Only one zoneset can be active at one time.
• A zone can be a component of more than one zoneset.
Examples The following is an example of the zoneset active command:
8/20q FC Switch #> zoneset active
Active ZoneSet Information
--------------------------
ActiveZoneSet
LastActivatedBy
LastActivatedOn
The following is an example of the zoneset list command:
8/20q FC Switch #> zoneset list
Current List of ZoneSets
------------------------
alpha
beta
The following is an example of the Zoneset Zones command:
8/20q FC Switch #> zoneset zones ssss
Current List of Zones for ZoneSet: ssss
----------------------------------
zone1
zone2
zone3
See also zoning edit, page 308
zoning save, page 315
302 Command Reference
Bets
admin@OB-session6
day month date time year