Zoning Edit; Zoning Database Parameters - HP StorageWorks 8/20q Command Line Interface Manual

zoning edit

Description Opens a Zoning Edit session for the non-volatile zoning database or merged zoneset in which to
create and manage zonesets and zones.
Authority Admin session
Syntax
zoning edit [database]
Operands
[database]
Opens an edit session for the zoning database given by [database]. If you omit [database], an
edit session for the non-volatile zoning database is opened.
database parameters
Table 73
Parameter
configured
merged
Examples The following is an example of the zoning edit command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #>
.
.
8/20q FC Switch (admin-zoning) #> zoning save
The changes have been saved; however, they must be activated
before they can take effect -- see Zoneset Activate command.
See also zone, page 298
zoneset, page 301
zoning cancel, page 304
308 Command Reference

Zoning database parameters

Description
Opens a zoning edit session for the non-volatile zoning database.
Opens a zoning edit session for the temporary, merged zoneset received
from another switch.
Table 73 describes the zoning