System Process Information; Elapsed Time Between Resets; Configuration Information - HP StorageWorks 8/20q Command Line Interface Manual

System process information

The ps command displays system process information to help you determine what processes are running
and central processing unit (CPU) usage.
The column titles in the following example are:
• PID—Process identifier
• PPID—Parent process identifier
• %CPU—Percentage CPU usage
• %MEM—Percentage memory usage
• TIME—Actual processing time
• ELAPSED—Elapsed time since the process started
• COMMAND—The command that initiated the process.
The following example displays current system processes.
8/20q FC Switch #> ps
PID PPID %CPU %MEM
244
245
246
247
248
249
251
252
253
254
255
256
257
282
284
285
308

Elapsed time between resets

The uptime command displays the elapsed time since the switch was last reset and the reset method.
Note that a hot reset or non-disruptive firmware activation does not reset the elapsed time reported by this
command. The following example displays the time since the last reset.
8/20q FC Switch #> uptime
Elapsed up time
Reason last reset: NormalReset

Configuration information

The show config command displays a variety of configuration information at the port and switch levels.
In addition to the basic switch configurations, the show config command displays parameters that
control how data is maintained in the security and zoning databases. The show config command
displays the following types of information:
• Switch configuration
• Zoning configuration
• Security configuration
See also "Displaying port
38 Switch Configuration
TIME
224 0.0 0.3 00:00:04
224 0.0 0.3 00:00:06
224 0.0 0.3 00:00:09
224 0.0 0.6 00:00:33
224 0.3 2.8 00:09:59
224 0.0 0.3 00:00:16
224 0.0 0.4 00:00:06
224 0.0 0.6 00:00:16
224 0.0 0.8 00:00:08
224 0.0 0.5 00:00:03
224 0.0 0.5 00:00:09
224 0.0 0.7 00:00:06
224 0.0 0.6 00:00:13
254 0.0 0.5 00:00:00
224 0.0 0.6 00:00:08
282 0.0 0.5 00:00:00
224 0.0 0.8 00:00:29
: 0 day(s), 2 hour(s), 28 min(s), 44 sec(s)
parameters, page 39
parameters, page 39
parameters, page 40
information" (page 57).
ELAPSED COMMAND
2-03:02:31 cns
2-03:02:31 ens
2-03:02:31 dlog
2-03:02:31 ds
2-03:02:31 mgmtApp
2-03:02:31 sys2swlog
2-03:02:30 fc2
2-03:02:30 nserver
2-03:02:30 PortApp
2-03:02:30 qfsApp
2-03:02:30 mserver
2-03:02:30 eport
2-03:02:30 zoning
2-03:02:26 qfsApp
2-03:02:26 snmpservicepath
2-03:02:26 qfsApp
2-03:02:25 cim_server