HP StorageWorks 8/20q Command Line Interface Manual page 211

Notes • The Callhome service must be active to support Call Home e-mail notification. See the
set setup services command.
• The primary, secondary, or both SMTP servers must be properly addressed and enabled on the
switch to activate Call Home e-mail notification. If both SMTP servers are enabled, the primary
server is active.
• The switch will reroute Call Home e-mail messages to the secondary SMTP server if the primary
should become unavailable. Primary and secondary identities do not change upon transfer of
control.
• Callhome profiles determine the events, conditions, and e-mail recipients of Call Home e-mail
messages. For information about creating Call Home profiles, see the profile command.
Examples The following is an example of the set setup callhome command:
8/20q FC Switch (admin) #> set setup callhome
A list of attributes with formatting and current values will follow. Enter a
new value or simply press the ENTER key to accept the current value. If you
wish to terminate this process before reaching the end of the list press 'q'
or 'Q' and the ENTER key to do so.
If either the Primary or Secondary SMTP Servers are enabled, the
FromEmailAddress attribute must be configured or the switch will not attempt
to deliver messages.
Current Values:
PrimarySMTPServerAddr
PrimarySMTPServerPort
PrimarySMTPServerEnable
SecondarySMTPServerAddr
SecondarySMTPServerPort
SecondarySMTPServerEnable
ContactEmailAddress
PhoneNumber
StreetAddress
FromEmailAddress
ReplyToEmailAddress
ThrottleDupsEnabled
New Value (press ENTER to accept current value, 'q' to quit):
PrimarySMTPServerAddr
PrimarySMTPServerPort
PrimarySMTPServerEnable
SecondarySMTPServerAddr
SecondarySMTPServerPort
SecondarySMTPServerEanble
ContactEmailAddress
PhoneNumber
StreetAddress
FromEmailAddress
ReplyToEmailAddress
ThrottleDupsEnabled
Do you want to save and activate this Callhome setup? (y/n):
See also callhome, page 129
profile, page 175
set setup services, page 215
0.0.0.0
25
False
0.0.0.0
25
False
nobody@localhost.localdomain
<undefined>
<undefined>
nobody@localhost.localdomain
nobody@localhost.localdomain
True
(hostname, IPv4, or IPv6 Address):
(decimal value)
(True / False)
(hostname, IPv4, or IPv6 Address):
(decimal value)
(True / False)
(ex: admin@company.com)
(ex: +1-800-123-4567)
(include all address info)
(ex: bldg3@company.com)
(ex: admin3@company.com)
(True / False)
HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 211
:
:
:
:
:
:
:
:
:
: