Removing Members From A Group - HP StorageWorks 8/20q Command Line Interface Manual

If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Group Name
Group Type
Group Member
Authentication
PrimaryHash
PrimarySecret
SecondaryHash
SecondarySecret
Binding
Finished configuring attributes.
To discard this configuration use the security cancel command.

Removing members from a group

To remove a member from a group, enter the group remove command, as shown in the following
example:
8/20q FC Switch (admin-security) #> group remove group_1 10:00:00:c0:dd:00:90:a3
g1
ISL
10:00:00:c0:dd:00:90:a3
(None / Chap)
(MD5 / SHA-1)
(40 hex or 20 ASCII char value) [
(MD5 / SHA-1 / None)
(32 hex or 16 ASCII char value) [
(domain ID 1-239, 0=None)
HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide
[None] chap
[MD5 ] sha-1
] 12345678901234567890
[None] md5
] 1234567890123456
[3 ]
97